FS: JBL LSR6328P active speakers x 3

[Brent_Sydney]

BARGAIN!
USD$2400 for all 3 excluding shipping from Sydney Australia (hence low price to help international buyers cover the cost of shipping)

Hi res images attached below.

4 year old LCR set of 2 way Active JBL LSR 6328P series monitors with Room mode correction.

My beloved JBLs.

Fantastic for theatrical premixing, these mid field monitors are VERY powerful, accurate and every mix I've done has translated beautifully to the JBL 3 way theatre playback systems common here in Australia.

I'm setting a bargain price on these to move them before Christmas and to give headroom for serious buyers in the US to cover the cost of shipping. They are in their original packaging that came to me from the states, very robust and safe for shipping. Have been in air conditioned premixing theatre most of their life, and a home studio recently - where they are simply overkill for my needs, hence moving them on to a more suitable home. I had to put a small square of gaff over the LEDs as they were behind a microperf screen in my mix room, so there's a little bit of glue on the speakers near the LEDs, but that's the only defect on an otherwise gorgeous set of monitors.

Will ship anywhere WW with a service of your preference that is available in Sydney. Commonly Fedex for items going to the USA - also probably cheaper if you book the pickup in the USA rather than getting me to do it here in Aussie dollars.

Good luck with the bidding!

http://www.jblpro.com/www/products/r...p#.VkX1xql95E4

FEATURES
∧
Advanced Linear Spatial Reference design ensures flatter-off-axis response for greater clarity at the mix position.
RMC™ Room Mode Correction provides electronic control of room modes. User measurement and
calibration kit available.
Differential Drive® technology with dynamic braking for extended low frequency response and minimal
power compression.
Integrated bi-amplification with factory calibrated sensitivities.
Titanium composite high frequency transducer with Elliptical Oblate Spheroidal waveguide for precise
pattern control.
Magnetically shielded high frequency transducer minimizes interference when used in close proximity to
video monitors.
High-density baffle for low enclosure resonance.
Linear Dynamics Aperture port design eliminates port turbulence and reduces port compression.
Reinforced enclosure and convenient mounting points for mounted installation.
Integral handles facilitate ease of positioning.

SPECIFICATIONS
^
Frequency Response 50 Hz - 20 kHz
(+1, -1.5 dB)
Enclosure Resonance Frequency 38 Hz
Low Frequency
Extension User controls
set to default
-3 dB 46 Hz
10 dB 36 Hz
Low-High Frequency
Crossover 1.7 kHz 6th-order acoustic Linkwitz-Riley
Distortion, 96 dB SPL, 1m N/A
Mid-High Frequency
(120 Hz - 20 kHz) N/A
2nd Harmonic <0.6%
3rd Harmonic <1%
Maximum SPL (80 Hz - 20 kHz) >108 dB SPL / 1m
Maximum Peak SPL
(80 Hz - 20 kHz) >111 dB SPL / 1m
Signal Input Neutrik “Combi” XLR-1⁄4-in tip-ring-sleeve balanced or unbalanced positive voltage applied to XLR pin 2 (1⁄4" tip) produces outward woofer motion
Calibrated Input Sensitivity, XLR & 1⁄4" N/A
+4 dBu / +8 dBu 96 dB SPL / 1 m
-10 dBV 96 dB SPL / 1 m
AC Input Voltage 100 / 240 VAC
AC Input Connector IEC
Long-Term Maximum
System Power 220 W (IEC265-5)
Self-Generated Noise Level <+10 dBA / 1 m Tonal-artifact-free

[Brent_Sydney]

bump

[Brent_Sydney]

Amazing speakers, great condition, up for grabs to a good home.

[Brent_Sydney]

bump

[Brent_Sydney]

bump

[digartisan]

still for sale?

Im in Adelaide.

[Brent_Sydney]

Just emailed you. Still available.

[syMPh]

Are these still avail? Im in perth

[Brent_Sydney]

Hi Symph, yes until Feb then I have a buyer returning from OS to take them.
He hasnt put a deposit down and is happy for me to sell them in the meantime. Msg me for a good AUD price to keep them local (minimise carbon footprint eh?) :)

[Brent_Sydney]

bump - 2 weeks left before they are gone!