|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
Audio input not working
I'm new to Pro Tools and need help when recording audio. I am running a MacBook Pro with Mojave and Pro Tools First. I am trying to record tracks from both a keyboard and a mic. I have both connected into a U-Phoria UMC404HD. The mic is running into the first input and the keyboard is running into the second input. Uphoria is then connected to my computer via USB. I've reviewed many videos and have selected the correct things in both hardware and playback engine and the input and output on the tracks are correct. I can hear both mic and keyboard through my headphones so the hardware setup should be correct. However, when I go to record, I am only get a flat line. There is no sound and no waveform and nothing on playback. Everything works in other programs (Garageband and Audiacity), but not in PTF so apparently there is a setting in PTF that I missing, but I can't figure out what I am doing wrong.
Please help! |
#2
|
|||
|
|||
Re: Audio input not working
You can hear both inputs.... but if you are using hardware monitoring in the interface (are you?) that tells you nothing about Pro Tools working.
Are you record arming all tracks you want to record and record arming the transport as well? Are you vertically zoomed out on the track? Zoom in all the way. What keyboard, what mic, what are the input gain levels set to in the interface. What are your track fader set to? You your be in pre-fader metering Mode in Pro Tools, I assume First has that. Are you recording the keyboard to an audio track? Or or MIDI or instrument? Get one thing working at a time. Simplest first, One mono audio track recording the Mic Tell us exactly what you are doing not that stuff is “correct”... because it is likely not. |
#3
|
|||||||
|
|||||||
Re: Audio input not working
Thanks so much for your reply. Please see the answers to your questions in italics. I'm posting screen shots, I hope they load and it helps in the troubleshooting process.
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Get one thing working at a time. Simplest first, One mono audio track recording the Mic. I'll just be happy to get either one working at this point! Quote:
Screen shot of playback engine: https://flic.kr/p/2eeGs8F Screen of harware setup: https://flic.kr/p/RSbv1F Thanks for your help with this!!!! Last edited by GodivaGirl; 04-22-2019 at 04:39 PM. Reason: Added content and edited for readability |
#4
|
||||
|
||||
Re: Audio input not working
If you are monitoring with headphones connected to your interface you will hear the inputs even if Pro Tools doesn't. Basics. Record arm one track. Play or sing and note if there is any "signal" (green line) coming into Pro Tools. If not then most likely you have to go back to drivers and or core audio settings but before that make sure that your interface is selected as the Playback engine.
Here is a list of common issues http://duc.avid.com/showthread.php?t=402840
__________________
Dell XPS 8900 i7-6700K CPU @ 4.00GHz 64 Gig Memory:Seagate 2x 2TB, 4TB,500gb EVO OS Windows 10 pro PT 2023.3 Studio through an A&H Qu-32 |
#5
|
|||
|
|||
Re: Audio input not working
Quote:
Thanks. |
#6
|
|||
|
|||
Re: Audio input not working
Start at the basics. Get playback working first (not clear if you have or not)...
What is the playback engine in Pro Tools set to? Did you install the latest drivers for the interface? Attach a screenshot of the Setup>Playback Engine panel and the Setup>IO>Input and Setup>IO>Output panels if you can. Create a new empty session running at 44.1 kHz. Create a stereo audio track. Drag and drop a known good mp3 or similar audio file onto that track. Do you see the waveform? Can you play that back? Report back once you have that working. |
#7
|
|||||
|
|||||
Re: Audio input not working
Quote:
Quote:
Quote:
Quote:
Quote:
Last edited by GodivaGirl; 04-22-2019 at 05:47 PM. |
#8
|
|||
|
|||
Re: Audio input not working
One small nit, you are using the interface as the playback engine and then also showing the the interface as part of an aggregate IO device that you are not using as the playback engine. It will not directly cause issues if it is not used, but just keep stuff simple and don’t have the interface or any other device selected as part of the Pro Tools aggravate IO device.
Last edited by Darryl Ramm; 04-22-2019 at 09:18 PM. |
#9
|
|||
|
|||
Re: Audio input not working
Get things as simple as possible.
Microphone connected to a balanced XLR (not 1/4” TRS) into the input 1 multi-connector on the front of the interface. Disconnect anything else unneeded from the interface. If you do not know what a balanced XLR cable is (XLR connector at both ends) Google it. On the interface turn up the gain to ~3/4. Pad disengaged. Phantom power on. Now create a mono audio track, with the input set to input 1. Try recording (you are arming the track and transport correctly). Speak moderately loudly into the microphone and see if you see any waveform and can hear anything playing back. You must un-record-arm the track before playing it back. If nothing is getting recorded you can use hardware monitoring to check the microphone is quirking as before. BTW you can also try using software monitoring through Pro Tools by NOT selecting low-latency monitoring in Pro Tools and turning the interface mix knob all the way to “PB”. Things not working post a screenshot showing the audio track in the mix window and include the input and output IO selectors. Last edited by Darryl Ramm; 04-22-2019 at 09:26 PM. |
#10
|
|||
|
|||
Re: Audio input not working
Hi.
I'm having the same problem. I've been using a Focusrite Clarette for years and always worked. I've just upgraded Mac to Mojave if that matters. Now. Everything set up as before. Mic plugged in and when I arm record......a flat line and no green signal on the track. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Audio Input not working Pro Tools|First | rachelrose294 | Pro Tools | Intro Discussion | 0 | 09-01-2016 01:26 PM |
M-Audio Fast Track Ultra fisical input 1 appears in VST input 2 | blackpauldays | FireWire & USB Audio Interfaces (Win) | 0 | 07-19-2016 08:43 AM |
Digi 002 - optical input not working / only DI channel 1 working | Maulden7 | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 12 | 11-07-2013 01:46 AM |
using HDMI input mutes line audio input of TV | mr.armadillo | Post - Surround - Video | 15 | 09-24-2013 12:33 AM |
XLR INPUT 3 and 4 NOT working.............help please.... | ninja pro-tools | Pro Tools TDM Systems (Win) | 0 | 07-12-2008 11:24 AM |