|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
|
|
Thread Tools | Search this Thread | Display Modes |
#1
|
||||
|
||||
Fader in D-Command goes only up to -77.6dB in Pro Tools when pushed all the way up
Hey all,
Has anyone witnessed this before? https://www.icloud.com/photos/#02cZF...c14iXB7AUVokaA The fader is brand new - as I replaced it thinking the one there was faulty. In the tests the fader responds to touch values as anticipated. But for cycle, group, recal, etc. it's not moving at all. Any ideas would be hugely appreciated. |
#2
|
|||
|
|||
Re: Fader in D-Command goes only up to -77.6dB in Pro Tools when pushed all the way u
grab yourself the D-Command Manual if you don't have it.
Find Utility Mode and then the Fader section on recalibration.
__________________
Pro Tools Ult 2024.3.1, HDX 2, MTRX/SPQ, RME BBF Pro + MADIface Pro • S1 x 2, Fire Max11 x 2, Dock, iPad Air5 • Mac Mini 14,12, 12 core, macOS 13.6.6 • RAM 32GB, SSD 4TB, GPU 19 core • QNAP TVS-872XT 148TB TB3 |
#3
|
||||
|
||||
Re: Fader in D-Command goes only up to -77.6dB in Pro Tools when pushed all the way u
Hey BScout.
It was my first port of call unless I am doing this incorrectly. Just in case I am goofing up somewhere: You mean to press the RECAL in Utility->Test-> Fader-> Recal? If so, that’s exactly what I did. I thought that there was an option to recalibrate specific faders individually but it might have been a misconception. Sent from my iPhone using Tapatalk |
#4
|
|||
|
|||
Re: Fader in D-Command goes only up to -77.6dB in Pro Tools when pushed all the way u
There was. Don't have a D-Command anymore. But it was like you put it in the mode and then moved the fader to the lowest and then the highest position and then finally to 0.
__________________
Pro Tools Ult 2024.3.1, HDX 2, MTRX/SPQ, RME BBF Pro + MADIface Pro • S1 x 2, Fire Max11 x 2, Dock, iPad Air5 • Mac Mini 14,12, 12 core, macOS 13.6.6 • RAM 32GB, SSD 4TB, GPU 19 core • QNAP TVS-872XT 148TB TB3 |
#5
|
||||
|
||||
Re: Fader in D-Command goes only up to -77.6dB in Pro Tools when pushed all the way u
If recalibrating doesn't bring it back to normal functioning try swapping it with the fader next to it and see if the problem moves with the fader or stays with the slot.
__________________
Will Russell Electric Wilburland Studio https://linktr.ee/wilburland M1MAX Mac Studio OS 14.4.1, PT2024.3, HDX, S1/Dock M1 PRO MacBook Pro OS 14.4.1, PT2024.3, BabyFacePro FS |
#6
|
||||
|
||||
Re: Fader in D-Command goes only up to -77.6dB in Pro Tools when pushed all the way u
Quote:
I did swap the fader (see my initial post). |
#7
|
||||
|
||||
Re: Fader in D-Command goes only up to -77.6dB in Pro Tools when pushed all the way u
Quote:
From my end, I upgraded the firmware of the desk, hit the recal button a few times and swapped the fader. It must be something else. The fader board possibly? But funnily, after having done all that the fader can go up to -72.7dB!! |
#8
|
||||
|
||||
Re: Fader in D-Command goes only up to -77.6dB in Pro Tools when pushed all the way u
My suggestion was to swap it with the one next to it just in case the one that you got as a replacement isn't functioning properly. I have received non-functioning parts before.
__________________
Will Russell Electric Wilburland Studio https://linktr.ee/wilburland M1MAX Mac Studio OS 14.4.1, PT2024.3, HDX, S1/Dock M1 PRO MacBook Pro OS 14.4.1, PT2024.3, BabyFacePro FS |
#9
|
||||
|
||||
Re: Fader in D-Command goes only up to -77.6dB in Pro Tools when pushed all the way u
My suggestion was to swap it with the one next to it just in case the one that you got as a replacement isn't functioning properly. I have received non-functioning parts before.
__________________
Will Russell Electric Wilburland Studio https://linktr.ee/wilburland M1MAX Mac Studio OS 14.4.1, PT2024.3, HDX, S1/Dock M1 PRO MacBook Pro OS 14.4.1, PT2024.3, BabyFacePro FS |
#10
|
||||
|
||||
Re: Fader in D-Command goes only up to -77.6dB in Pro Tools when pushed all the way u
Quote:
I will follow your suggestion later today but for two new faders to exhibit the same issue in the same slot... I don't know, it seems that it is more the slot than the fader. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Can I create an 8 fader custom group on an 8 fader d command? | [email protected] | ICON & C|24 | 2 | 12-21-2020 08:56 AM |
D-Command ES + Fader Madule Fader Problems | FedericoF | ICON & C|24 | 11 | 05-24-2013 04:27 PM |
FS 24 Fader D Command | puffin | Buy & Sell | 0 | 06-14-2012 07:55 AM |
40 fader D-Command! | RichN | ICON & C|24 | 8 | 10-22-2008 04:50 PM |
Anyone here get an 8 fader D-Command instead of a C|24? | banana boy | ICON & C|24 | 0 | 05-25-2007 06:19 AM |