|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
Main Outs
Does anyone have intermittent problems with the main outs not working? I found where I can set the Amp Outs - but the Main Ous should always work, right?
|
#2
|
|||
|
|||
Re: Main Outs
as far as i know they should. i may have to go back and read the manual though. i never use the amp outs, so i'm not sure. i thought the main outs (xlr) were supposed to always be on though.
|
#3
|
|||
|
|||
Re: Main Outs
Thanks for the response Ross.
That was my understanding as well - the Main Outs are always active. I hooked up the XLR to the left Main Out before turning the 11R on. I did this twice - once at church, once at home. Both times, no sound. After scrolling through all the menu options, reading the manual and searching the forums I tried the Main Out again - this time plugging in after the 11R was already on - and voila, it worked. Is there some odd "kill switch" that sliences the Main Out if you plug a cable in before powering the 11R on? That would seem pretty odd to me - but that is the only correlation I've made at this point. |
#4
|
|||
|
|||
Re: Main Outs
The main outs can be muted. Did you check to make sure you don't have the main mute on accidentally?
|
#5
|
|||
|
|||
Re: Main Outs
I don't believe that was the case as it did work later - although it is also possible in my mad fury I did change that. Where is the mute setting, just so I know?
|
#6
|
|||
|
|||
Re: Main Outs
I've had this happen twice and have learned to check a few more things when setting up live. First, I had muted the main out in the studio with the 11R Window and forgot about it when I shut down so i had nothing when I set up live. You can unmute from the 11R going to USER OPTIONS -> Volume Knob -> SW 1 to toggle on/off. The other time, I had not plugged in my volume pedal and the volume level must have been set to zero when I shut down (I had Persistent Volume Pedal set). So again, when I set up I had nothing until I figured that one out. Both times, I worked through several cable changes thinking that might be the problem....now I know to check a couple other simple, but not obvious things.
Good luck! |
#7
|
|||
|
|||
Re: Main Outs
I just got mine yesterday - used from Ebay. The previous owner may have had the Main Outs muted. I also may/may not have changed that setting over the 45 minutes to an hour that I spent pouring over settings. I'll have to check that to ensure it's set to not mute the Main Outs and test further.
Thank you for the input/suggestions - it's GREATLY appreciated! |
#8
|
|||
|
|||
Re: Main Outs
Okay - I hadn't muted the Main Outs. However, I did notice that when I wasn't getting any output from the mains I also wasn't showing any input either. When I activated the tuner it was stuck on "F" regardless of what I did.
I tried moving the sampling rate from 44.1 to 48, which seems to fix it. Is there a problem with leaving it like that (assuming I'm using the 11R as a live modeler only)? I've not tested by not being plugged into the input at powerup - but that may also solve my problem. Also - my serial number does not end in E. |
#9
|
||||
|
||||
Re: Main Outs
Quote:
__________________
Brian Windows 11 Pro | macOS 12 Pro Tools 2022 benonistudio.com Youtube Channel - benonistudio Plugin Deals @benonistudio |
#10
|
|||
|
|||
Re: Main Outs
What needs to be fixed/replaced? What is the cost of something like that?
I am the second owner (that I'm aware of). I just got it off ebay this week. Do I still have any recourse in this situation - other than to try to return it to the Ebay seller? |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Digi002 rack main outs vs monitor outs | studiojb | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 2 | 11-03-2012 07:46 AM |
Problem with 002 main outs as well as head phone outs? | wiseal1 | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 3 | 12-10-2009 11:36 AM |
001.....Main Outs or Monitor Outs | G. Klopfenstein | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 1 | 07-01-2004 08:07 PM |
main outs vs. others | freakuincy | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 2 | 01-08-2002 06:54 AM |
How can I have the monitor outs and main outs to the same input? | voxpitch | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 2 | 03-15-2001 09:16 AM |