|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
Magic ID does not match....
I went to open a session yesterday and got this message: Could not complete the Open Session... command because magic ID does not match while translating Session Window Config.
Now I had already been working for hours and just went to open another session when this happened. Then I proceeded to try to open other sessions and they opened fine. Then through my trouble shooting I found that if I newly saved any session the problem would now spread to that session. I can't save any sessions now. I've done trouble shooting with sessions on 4 different drives including the Main HD. I've repaired permissions, repaired Disk. I've trashed all the usual preferences and Digidesign Data bases. I'm at a lose now. Has anybody run into this? By the way I am on Protools 8. NEED HELP. I'm totally screwed if I can't get this fixed by tomorrow. |
#2
|
|||
|
|||
Re: Magic ID does not match....
Search Magic ID.
__________________
@theaudiogeek | www.EPICSounds.ca | www.AudioGeekZine.com | www.HomeRecordingShow.com | |
#3
|
|||
|
|||
Re: Magic ID does not match....
Nothing that i've found in my searches have been helpful. I just figured out that the sessions are not necessarily fully corrupt. I can take the same session that will not open in 8 and put it on a computer that is running 7.3.4 and it opens just fine. Then if a Save it in 7.3 and bring it back to the 8 computer it opens again. But if I save it again it becomes corrupt to 8. Just the weirdest thing I've seen in all my years working on protools. I hope I haven't just stumbled on a major quirk with the new 8 software.
|
#4
|
|||
|
|||
Re: Magic ID does not match....
From the Digibase...
Quote:
Quote:
It's likely reading on your 7.4 system, because your database files are not corrupt on that system. if that fails, and does not fix the problem. I'd safely Backup ALL sessions off the drive they're on, rePartition and Format the drive in OS X Disk Utility, and move the sessions back on to the drive.
__________________
David - MacStudio M1 - HDX II Sonnet xMacStudio - 16x16 HD i/o x 6 - PT ULTIMATE - SONOMA - ProTools Dock / S1 / Control App |
#5
|
|||
|
|||
Re: Magic ID does not match....
Thanks, I've done all the trashing of prefs etc. already. I'm just not convinced that it is a drive issue yet. I've tried opening and saving on 4 different firewire drives with no success. I've also tried the same on the main hd with no success. I'm feeling that this is an 8 bug that is just appearing. The one thing that changed in the system is that I updated Quicktime yesterday. I'm starting to feel that this has something to do with the problem being that quicktime is very integrated into protools. I'm at a bit of a loss and I think i need to get a digi expert on the phone before I do anymore drastic steps.
|
#6
|
|||
|
|||
Re: Magic ID does not match....
Hi,
this really sounds familiar, and I'm quite sure it's a leopard problem. Check the thread from January the 7th by the name of "PT8 Problem with Magic ID" (I'm on iPhone and can't copy paste). I was just as desperate then and repairing from the installation disk and clean-installing leopard did the trick. Good luck, Martin
__________________
Mac Pro 2,4 GHz 12-Core Intel Xeon (Westmere) 32 GB RAM, OSX 10.10.5, HD I/O 16x16 analog, HD I/O 16x16 digital, 192, PT HDX2, PT HD 12.6.0 http://www.pelhamundhaas.de/index2.html http://www.pelhamundhaas.de/vita.html www.3-p.de www.imglashaus.de |
#7
|
|||
|
|||
Re: Magic ID does not match....
Thanks, it's starting to look like that's what I need to do. It's just such a weird problem to come out of nowhere. I would understand if something happened in the system before it came up.
|
#8
|
|||
|
|||
Re: Magic ID does not match....
Question for anybody that has had this problem. Do you remember if you updated quicktime through the software updater before this happened to you? I'm just trying to come up with a possible reason that it is happening to help tech support. This is the only change that I made in the system during the whole day, so it is the only thing that I can point to at this point.
|
#9
|
|||
|
|||
Re: Magic ID does not match....
magic ID has been a problem in 7.4 as well. I've found that it often means that the session is hosed and you should go back to a previous version...
|
#10
|
|||
|
|||
Re: Magic ID does not match....
ProTools uses quicktime for various things. I wouldn't be surprised if that update wrecked something.
Try creating a new session and Import Session Data from the old one. If you're lucky you'll get everything back up to your last save.
__________________
@theaudiogeek | www.EPICSounds.ca | www.AudioGeekZine.com | www.HomeRecordingShow.com | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Magic ID does not match | shea | Pro Tools 10 | 6 | 10-10-2013 04:56 PM |
SOMEBODY HELP ME!!!! 'Magic id doesn't match' | DW7000 | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 6 | 04-17-2009 09:56 PM |
Magic ID does not match | oigresbg | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 2 | 03-25-2009 01:45 PM |
Magic ID does not match ???? | Aquarius | Pro Tools TDM Systems (Mac) | 42 | 01-18-2006 01:21 PM |
HELP: Magic ID does not match... | aziel | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 7 | 01-29-2003 02:28 PM |