Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Learn & Support


Avid Home Page

Go Back   Avid Pro Audio Community > Pro Tools Software > Tips & Tricks

Reply
 
Thread Tools Search this Thread Display Modes
  #51  
Old 10-06-1999, 06:42 PM
Garry Garry is offline
Member
 
Join Date: Jul 1999
Posts: 54
Default Re: HUI Electromagnetic Field (Part 2) The sequel

Fellow HUI Users,

I too had the aforementioned sticky fader problem, and solved it in the following manner: I ran a length of Monster Cable from one of the screws on the bottom of the HUI (the ones on the perimiter, screwed into the chassis) to a copper water pipe in a corner of my control room. Problem solved. Hope this helps.

Garry Rindfuss
Reply With Quote
  #52  
Old 10-09-1999, 10:48 AM
imported_yes imported_yes is offline
Member
 
Join Date: Dec 1969
Location: Sherman Oaks,CA. U.S.A
Posts: 423
Default Re: HUI Electromagnetic Field (Part 2) The sequel

To tell you the truth, I think Mackie has dropped the ball on HUI. Their R&D is concentrating on making their own DAW. The last time I talked to Mackie, they don't even get current updates from Digi to test the HUI with!. The HUI has the potential to be a very exandable unit (Fader packs/ethernet) but it still basically the same unit since it's release. They did however change the faders due to the problems with the original ones. I did have problems with faders also. But after the third one, I got one that I've been happy with. Also the tech at Mackie said that if anyone has a continual fader problem they would take the unit back and refund your money.
__________________
yes
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
DUC Move sequel - StudioTimi meets Al Schmitt Screener Pro Tools TDM Systems (Mac) 14 09-17-2010 02:36 PM
Near Field Monitors muzak13 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) 12 06-20-2006 09:22 AM
Near-field vs. far-field monitoring Mark_Knecht 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 2 05-15-2002 07:37 PM
Amp for Near Field ProductionEngelads 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 1 04-26-2002 03:54 PM
Q650/601/66 upgrade card and PT..THE SEQUEL nymo Pro Tools TDM Systems (Mac) 1 03-27-2000 08:50 PM


All times are GMT -7. The time now is 10:47 PM.


Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com