Low Latency Monitoring and Hardware Inserts

[BobbyDazzler]

I'm having some strange behaviour with hardware inserts and LLM.
If I have a track sending to the LLM nominated outs (1-2 in this case), and I use a hardware insert, the track no longer passes through my 1-2 master track plugins (L2007 in this case), if I make the harware insert inactive, the track is now effected by the master track plugins. (The mentioned track is not in record either).

I checked the manual, but couldn't find this specific situation noted.

Can anyone else recreate this?

[cananball]

LLM disables plugins. This is normal behavior AFAIK

[BobbyDazzler]

Originally Posted by cananball

LLM disables plugins. This is normal behavior AFAIK

Only if you're in record. This is disabling the master section when not in record.

[BobbyDazzler]

No-one? Avid?
I'm actally finding LLM so hard to work with, its almost useless.
I turned it on in an old session the other day, and it muted the bass. It wasn't a well played bass, but it should be my call to mute it, not the programs.
Restart tha Mac, and it came good again.

[danander11]

Originally Posted by BobbyDazzler

Restart tha Mac, and it came good again.

The bass playing or the audio?

[necjamc]

Originally Posted by danander11

The bass playing or the audio?

That gave me a good laugh.

[BobbyDazzler]

Originally Posted by danander11

The bass playing or the audio?

Nice

I wonder how an artist would feel if you said.."That take was so bad I need to reboot."

[BobbyDazzler]

Bump...Still wondering about this one.

[mu-tron-kid]

One of my Colleagues just experienced this same error on a PT 8 LE with 002 rig.

Toggling LLM off seems to have solved it, but yes, with a couple of Hardware inserts, the audio was not passing to the Bounce...

Additionally, RTAS plug-ins placed AFTER the Hardware Insert were not having any audible effect...

No Tracks Record Enabled.

[albee1952]

LLM will disable inserts AND sends. If you want to record thru hardware, its best done before conversion. You CAN do it by turning LLM off and running at a low buffer, but you will suffer the latency from the extra chain of conversion(out to the hardware and back in).