|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
unable to pan via chan. strip encoders
The encoders for panning parameters are not working on the channel strips. The panning acts as if one is holding down the OPTION key--the panning jumps to the default position as soon as you move the knob. The panning knobs on the master module work, as do the joysticks. Just not the encoders on any given channel strip. This is happening only on one of four connected PT rigs, so I'm guessing it might be a setting in Pro Tools?
thanks in advance, oldmanpotter
__________________
It takes a big man to cry; it takes a bigger man to laugh at that man |
#2
|
||||
|
||||
Re: unable to pan via chan. strip encoders
Greetings,
If the value actually jumps from X to 0 then a default / null is being performed which indicates an OPTION key is being triggered somewhere from that particular workstation. I presume you have relaunched WS and PT on that rig? What version combination of WS, PT and OS are you running? best, Jeff |
#3
|
|||
|
|||
Re: unable to pan via chan. strip encoders
Thanks Jeff,
Note that this behavior only happens with that particular encoder, not with the joysticks, or the master module encoders. Yes, I did restart the entire system. Here are the specs: M40 frame WS version 18.3.0.244 OSX 10.12.6 PT 2018 4.0
__________________
It takes a big man to cry; it takes a bigger man to laugh at that man |
#4
|
||||
|
||||
Re: unable to pan via chan. strip encoders
So - a single encoder on a Process Module or a Knob Module? Do the other encoders on that same module work fine?
Jeff |
#5
|
|||
|
|||
Re: unable to pan via chan. strip encoders
Not sure about the other encoders on that module--I'll test later--but I know that the same encoder (bottom knob of the knob module) on other channel strips are behaving in the same manner.
__________________
It takes a big man to cry; it takes a bigger man to laugh at that man Last edited by oldmanpotter; 02-15-2019 at 06:22 PM. |
#6
|
|||
|
|||
Re: unable to pan via chan. strip encoders
Jeff,
Thanks for your advice but the problem has fixed itself--unable to get it to repeat. Peter (oldmanpotter)
__________________
It takes a big man to cry; it takes a bigger man to laugh at that man |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Chan. Select on mono strip activates Spill | Steven1145 | System 5 | 0 | 09-08-2017 01:58 AM |
A Trick to jump to chan where a bus routes to ? | LukeFromBerlin | macOS | 2 | 03-11-2012 12:39 PM |
003 Factory + 8 Chan pre = 16 ins? | -3db | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 3 | 11-05-2009 01:38 PM |
Eq 31/ oct for moniotr chan.. | kalunga | VENUE Live Sound Systems | 4 | 04-28-2009 09:32 AM |
002r - 8 chan of D/A | Produce_Dept | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 3 | 04-26-2005 09:07 PM |