Blackmagic Desktop Video Software v10.1.1 Update

[fizpop]

Originally Posted by Watagushu2013

Thanks for the post.

I have an old black magic extreme HD and it has been working fine only with 9.5.2. I use it now in protools 12.5 and the only thing that occurs is that if I try to monitor any [email protected] or 24fps video in any codec, it outputs a cropped 2048/1080 video on the tv. I don't know if this is caused by an sdi to hdmi adapter that I use to view on the tv or my tv itself.But the only way to fix it is to change the output of the video track in protools to 1080i 29.97 or 59.94 using the command key (Mac) and pressing the output tab.

That's my story.
I will test it with an Aja kona sometime soon
I will publish my findings

Let me know how the Kona Test goes, I have a BM card as well as a Kona but dont really have the time to test both properly. Stuck on PT 10 with the BM card at the moment.

[8dB.co.uk]

Originally Posted by Goombot

If you have to switch video frame rates in order to make things work then things are really wrong. I would immediately start using something else if that's the work around. Black magic really needs to get their s**t together.

Not necessarily.

Take a look at my Pro Tools Expert article comparing different video playback software to the AVE, using Blackmagic hardware.

Sent from my D5803 using Tapatalk

[Goombot]

send link...

[Watagushu2013]

Hi
I just installed an aja kona 3 in my protools 12.5 rig.
I am using 10.8.5 but I could install the latest driver for this card (10.6.1) that supports Mavericks and Yosemite, although works fine in mountain lion.
I think the driver is better written because I can now watch 1080p24 on my tv and my Blackburst reference video is showing in the Aja's control panel, with blackmagic drivers you could not see if the reference was getting in to the card.
Just my findings.

Cheers


Enviado desde mi iPhone utilizando Tapatalk

[8dB.co.uk]

Originally Posted by Goombot

send link...

http://www.pro-tools-expert.com/home-page/2016/3/10/is

Sent from my D5803 using Tapatalk

[SL1]

Can I use a BM Decklink with PT 12 Vanilla or does it have to be HD, ideally would like to use the HDMI out, but will settle for the Analogue if thats all it can do? thanks!

[Brandonx1]

Originally Posted by 8dB.co.uk

http://www.pro-tools-expert.com/home-page/2016/3/10/is

Sent from my D5803 using Tapatalk

Didn't this guy just do a blog about AVE saying it performed well?

http://www.pro-tools-expert.com/home...rt.html?rq=ave

[8dB.co.uk]

Originally Posted by Brandonx1

Didn't this guy just do a blog about AVE saying it performed well?

http://www.pro-tools-expert.com/home...rt.html?rq=ave

As I remember, he found the AJA to be good but not BM.

Sent from my D5803 using Tapatalk

[Marcel Risberg]

Repeating myself regarding the topic of this thread:

Originally Posted by Marcel Risberg

I think it would make sense to rename the title of this thread to "Blackmagic Desktop Video Software", without any version numbers in it.

Desktop Video just got a minor generation update: 10.7.x. I'm going to give those drivers a chance, although all of the 10.5.x and 10.6.x drivers performed bad with my Intensity Pro. I don't like falling behind with software updates, so I'm hoping for the best.

Copy and paste from their site:

What's new in Desktop Video 10.7
New features on Artist DNxIO:

• Add support for more DNxHR profiles on capture with Artist DNxIO
• Add support for audio punch-in

Fixes on UltraStudio 4K Extreme & Artist DNxIO:

• Fix intermittent PCIe detection issue on some PCs
• Output conversions are now applied to analog connections too
• Fix incorrect genlock offset in some modes

Fixes on all models:

• Fix issue when recording to tape using DaVinci Resolve
• Improved Avid support
• General performance and stability improvements

[audiobob]

Originally Posted by Marcel Risberg

Repeating myself regarding the topic of this thread:



Desktop Video just got a minor generation update: 10.7.x. I'm going to give those drivers a chance, although all of the 10.5.x and 10.6.x drivers performed bad with my Intensity Pro. I don't like falling behind with software updates, so I'm hoping for the best.

Copy and paste from their site:

So how did it go?