Presonus 24R Slate Raven PT Connectivity

[gtrDayve]

Hi all,

I've got a brand new setup via Sweetwater:
Creation Station Windows Computer
Slate Raven MTi
PreSonus 24R
(additionally Furman Headphone amp carryover from old system, not applicable right now)

As I'm setting things up I am unable to get audio to play from Pro Tools, although I see audio & have been able to record into PT.

I’m still not getting the audio set correctly.



I have a USB cable into the 24R from the computer, & XLR’s going out of the 24R into our soundboard. I did get the Pro Tools Playback Engine set to the 24R, which allowed me to record audio INTO Pro Tools; I seen the level & have a waveform. So I am getting audio into Pro Tools via the 24R. However I’m not able to hear it. Pro Tools acknowledges an SPDIF out as the “Main Out”, but nothing for output is mentioned for the 24R.

I opened the PreSonus Studio One software, & plugged a guitar into channel 1 of the 24R. I did hear the guitar, so I know sound is coming out of the 24R.

So I have Input to record into Pro Tools, but no sound coming out of it.
24R appears to be sending audio out as well so that’s goin’ on.



In the computer in the SOUND options, I have 24R listed, as well as an SPDIF, & the Raven. (Also fwiw I have the green mini-jack plug & cable from the back of the computer going into the Raven, mostly because those were the only two that had those jacks. )

In the Sound options I can TEST these different devices, where I see levels appear, but nothing comes out as far as I can hear. The 24R has a headphone jack & is into our sound system, the Raven does have a headphone jack which I am plugged into (volume up on it as far as I can tell), & the computer shows that SPDIF device even though I don’t know where that is. Even “Speakers” is listed & shows levels when I TEST it but no sound comes anywhere.



I know I’m pretty close; If I could get the sound hooked up I’d be there, but I’m missing a setting somewhere & I can’t seem to find what I’m looking for in the documentation provided & the links from email that were sent. I don’t know if it’s a setting in the computer, in Pro Tools, the 24R or the Raven.

I can't be the only one who's ever had this equipment so any help would be appreciated.

Thanks