|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
Which IP ports for AVID Control?
Hi,
we're having trouble connecting iPad to DAWs and I was wondering which ports need to be open for AVID Control to work? There a Ubiquity AP in the network and iPads are on a closed VLAN with the DAWs. Everything workd incl Spancontrol for Spanner so there's definitely flow of data from the iPad to the Mac. The only thing that doesn't work is AVID Control. I have allowed all TCP/UDP traffic from iPad to the DAW in the firewall. The only thing that DOES work however is connecting when the Wifi is enabled on the MAC connected to the same SSID/Network. I can enable the iPad in Eucon and I can then disable Wifi on the Mac and it will then keep on working across the net with the iPad connecting to the VLAN via the Ubiquity AP and the MAC via the normal ethernet connection. Only the initial connect only works when both are in the same Wifi. Very odd. I guess it's because they can see each other from within the AP for the connect. But why does this not work without turning on Wifi on the Mac side? I have tried everything from rules wide open on the firewall (pfsense) to specifically allowing all traffic iPad IP to MAC IP. No difference. Any other idea? I tried the recommendations in the tech info (IGMP snooping off etc. etc., no difference). mDNS (Bonjour) is enabled as well. This is with the latest AVID Control app and Eucon version Thanks! Frank.
__________________
PTHDn 2024.3 (OSX13.6.5), 8x8x8, MacPro 14,8, AJA LHi, SYNC HD, all genlocked via AJA GEN10, 64GB RAM, Xilica Neutrino, Meyersound Acheron Last edited by Frank Kruse; 10-14-2020 at 08:21 AM. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Most Waves plugins cannot be set properly from Avid control surfaces / Avid Control? | XJENSEN | Avid S1, S3, Dock and Control App | 3 | 08-11-2022 06:59 AM |
Avid Artist Mix - only ports 1-4 work, I've tried everything! | joren | Artist Series | 5 | 05-28-2014 03:10 PM |
Artist MC Control & Mix Midi ports broken | NickNack | Artist Series | 7 | 01-07-2014 04:32 AM |
Machine Control COM Ports: Sync I/O vs CPU | Tom Smith | Post - Surround - Video | 5 | 08-19-2008 02:10 PM |
9 pin Machine Control ports on USD or SYNC | Fritz | Post - Surround - Video | 16 | 04-16-2004 07:30 PM |