911! Anyone know the power supply for D Command?

[Third Eye Studios]

Originally Posted by alejandro7419

Hi Rob, I am about to order the same SNP-Z10B Led PSU you bought.

I did noticed that the output of the original PSU of the D-Command has 6 pins and the one you bought has 10 pins.
do you remember which pins did you have to skip when you installed them?
see picture below :

Thanks a lot

Bumping this thread to see if you got your answer?? In case I need to replace mine in the future. Thanks!

[crizdee]

Originally Posted by Third Eye Studios

Bumping this thread to see if you got your answer?? In case I need to replace mine in the future. Thanks!

Hi,


SNP-Z107 Faders

SNP-Z10B Led

SNP-9544 Logic



Chris

[Third Eye Studios]

Originally Posted by crizdee

Hi,


SNP-Z107 Faders

SNP-Z10B Led

SNP-9544 Logic



Chris

Thanks for that! Do you know, are the logic and LED PSU's controlling the Xmon functions??

[crizdee]

Originally Posted by Third Eye Studios

Thanks for that! Do you know, are the logic and LED PSU's controlling the Xmon functions??

Hi,


Well i would take an educated guess the logic power supply would control all the functions. The LEDS and Faders have their own power supplies.


Do you have a specific problem tryimg to resolve?




Chris

[Third Eye Studios]

Originally Posted by crizdee

Hi,


Well i would take an educated guess the logic power supply would control all the functions. The LEDS and Faders have their own power supplies.


Do you have a specific problem tryimg to resolve?




Chris

Thanks for your help!! No specific problem here. Just trying to make sure I know what to do in the event of a failure. I can live without the faders if needed, but the Xmon control would be hard to deal with and patch around.

[avantipr]

Contact us at Avanti Power Repairs Ltd we will be able to help with all power supply problems.