eMix 6.0.3 Hybrid will not connect to EuconWS 3.3.2

[David S5 Fusion]

Running Windows workstation on W8 OS.
Upgraded to eMix 6.0.3 Hybrid will not connect to EuconWS 3.3.2. Etracer shows Hybrid tries to connect, and then disconnects on fail.
Rolled back to eMix 6.0.1 and EuconWS 3.1.3 - Eucon connects and working.
Tried to run eMix 6.0.3 and downgraded to EuconWS 3.1.3 on workstation side, the Hybrid connects with some minor bugs.

Done clean uninstall of Hybrid App on SC264, all deleted incl the .ini files.
Installed eMix 6.0.3, tried to connect another WS Mac Pro with PT11 and EuconWS 3.3.2 - Hybrid will still not connect.

Seems like the shipping version of EuconWS 3.3.2 from downloading eMix v6.0.3 will not connect to Hybrid under any circumstances. Is this a known issue? Is the new EuconWS 3.4 available for Hybrid?

[EddieJones]

This sounds like an install issue on the WS. You need to uninstall and remove any old EUCON before reinstalling.

[David S5 Fusion]

Hi, thanks a lot!
Done clean install several times. Also tried another (brand new) workstation with first-time Eucon WS install. Still no connection on Eucon WS 3.3.2 - eMix 6.0.3 Hybrid.

When downgrading brand new workstation to run Eucon WS 3.1.3, the Hybrid connects, even also when running latest eMix 6.0.3 (a few minor bugs, but it really connects)

In previous versions of eMix, the supported Eucon WS app was a special edition installer developed for use only with Hybrid. The previous installer file of Eucon WS 3.0.1 for Hybrid contained about 80MB of data.
In this latest eMix v6.0.3, the shipped Eucon WS app 3.3.2 appears to be exactly the same as the ordinary Eucon WS app for MC and others (about 40MB). Could it possibly be the wrong installer (the one for MC) is shipped, or should it now be the same installer all over, also when running Hybrid?

Thanks!

[Rpro]

Same issue here.

eMix 6.0.3 will not connect to Cubase Pro 8.5 or Nuendo 7 using EuconWS 3.3.2. Pressing the Eucon button then setup on my system 5 hybrid master module it shows the workstation names but when I press the button to activate them the button blinks and no connection is made. Etracer shows the same error. It tries to connect then fails.

[David S5 Fusion]

Hi Rpro,
This is exactly the same issue. Cubase Pro 8.5 and Nuendo 7 connects normally to EuconWS 3.3.2 on the workstation side. You can also see workstation in CM401 master module, but no connection can be made with Hybrid. Lamp is blinking when knob is pressed, then lit out. See Etracer log...

If you downgrade to EuconWS 3.0.1 for Hybrid, it will connect. But then you can't run Cubase Pro 8.5 or Nuendo 7 on Eucon protocol, because your EuconWS app is too old. Stucked...

I feel pretty sure that the shipping EuconWS 3.3.2 app in eMix 6.0.3 package is the version for MC and artist series. Let's hope the Avid guys soon will help us test setup on a corresponding Hybrid system to get it figured out.

[EddieJones]

Are you definitely sure that you uninstalled and reinstalled the new hybrid app after installing v6.0.3 ?

[Steven1145]

Eddie, on a side note I got my 6.0.3 install to work, following your instructions. Thanks for all the help.

Sent from my E5823 using Tapatalk

[David S5 Fusion]

Hi Eddie,
Still dealing with this problem. Have made all settings over and over. Also done a full system recovery of the SC264 from the recovery cd's. System is still up running on static ip adresses.
Is there any way to confirm I have the right EuconWS app? Version is 3.3.2.52034 Product version 3.3.2.10406722.
Right now I discovered that Hybrid app shows warning: problems loading configuration file ipythonrc.ini.
Thanks!

Sent fra min SM-G925F via Tapatalk

[EddieJones]

Originally Posted by David S5 Fusion

Hi Eddie,
Still dealing with this problem. Have made all settings over and over. Also done a full system recovery of the SC264 from the recovery cd's. System is still up running on static ip adresses.
Is there any way to confirm I have the right EuconWS app? Version is 3.3.2.52034 Product version 3.3.2.10406722.
Right now I discovered that Hybrid app shows warning: problems loading configuration file ipythonrc.ini.
Thanks!

Sent fra min SM-G925F via Tapatalk

That error is normal, what IP address range are you using ?

[Rpro]

Originally Posted by David S5 Fusion

Hi Eddie,
Still dealing with this problem. Have made all settings over and over. Also done a full system recovery of the SC264 from the recovery cd's. System is still up running on static ip adresses.
Is there any way to confirm I have the right EuconWS app? Version is 3.3.2.52034 Product version 3.3.2.10406722.
Right now I discovered that Hybrid app shows warning: problems loading configuration file ipythonrc.ini.
Thanks!

Sent fra min SM-G925F via Tapatalk

If you are on a Windows PC go ahead and disable the firewall then try Eucon again. I had an issue recently that windows 10 enabled the firewall after an update which broke Eucon again. Disabling the firewall again resolved the Eucon issue.