digi 001 midi ports + OMS . Cant get midi to work

[voltech]

I was wondering if anyone can help.

I've been using my AMT-8 for years with the same OMS midi studio setup.
No probs. But now I dont have my AMT-8 hooked up and I only want to
use the Digi 001's internal midi ports to be used solely with
my MOTOR MIX. How do I configure or edit the OMS studio set up
page so I only have the MOTOR MIX working with it??

Any help is greatly appreciated!

Thanks

Voltech

[mindnoise]

HI,


you must have the MOTOR MIX profile in your PT/Profile folder to control PT with it.

Take a look at the "MIDI Controller Guide" that came with your 001.

I am not really sure if you need to configure it under OMS.
The 001 midi ports should be auto recognized by OMS if you let it search for it.

For the MOTORMIX select "New Device" within OMS and enter the name and the send/receive channels
into the device page. Refer to your MotorMix manual to see what channels are used by the
controller.


That should do it

regs

[voltech]

Thanks regs..
That did it!

voltech