View Single Post
  #4  
Old 06-11-2018, 08:10 AM
creativecontrol's Avatar
creativecontrol creativecontrol is offline
Avid
 
Join Date: Nov 2007
Location: Madison, WI
Posts: 510
Default Displaying Preamp Controls on Process Module Encoder

With MTRX or any other PRE-compatible remote mic preamps, add microphone Gain control to the Process Module encoder by holding down the Back (arrow) button at the bottom of the Process Module while pressing the Input switch. The encoder should turn Red. Bank using the adjacent Arrow switches to get to the Gain parameter. As a shortcut, engage the ALL switch from the Master Module before performing this sequence to change the process module encoders on all channels. For higher resolution control of the preamp Gain, press Flip till the Process Module encoders glow bright white. Use Shift + Flip to exit back to the standard view.

Experiment by bringing other parameters to the process module encoder such as Threshold on DYN, Sends or HPF frequency for EQ.

https://www.dropbox.com/s/hncmgfkebq...61118.MOV?dl=0
__________________
Jeff Komar
Applications Specialist, Pro Audio
Avid
Reply With Quote