View Single Post
Old 02-29-2020, 09:54 AM
albee1952 albee1952 is offline
Join Date: May 2004
Location: Norwich, CT
Posts: 35,525
Default Re: Fast track Pro ''Hardware not connected, not streaming'' error ''

Hmmm, where to start?
#1-its an old interface(and not very good)
#2-M-Audio drivers are often crap
#3-you probably can't register it(and there's not much point)
#4-you would be better off with a new Focusrite 2i2 or similar

Since you downloaded 6.1.11, I assume you have Windows 7 or 8? Windows 10 is not going to work. On any Windows setup, there are a couple of things you need to do(assuming the FT actually works):
1-In Windows Sound Properties, set Windows to use the on-board sound card as the "Default Playback Device" This allows Pro Tools to control the interface and sample rate.
2-Open Device Manager>USB devices>double-click on each item and see if the popup window has a tab labelled "Power Management". If it does, click that tab and UNcheck the box for "Allow the computer to turn off this device to save power"
Gigabyte X79/intel i7 3930K, 32GB RAM, DIGI003 Rack

The better I drink...the more I mix.....

BTW, my name is Dave, but most people call me.........................Dave
Reply With Quote