Re: D Command--no signal to phones
Quote:
Originally Posted by oldmanpotter
Thanks Steff. Since I do hear some very low level audio coming from the headphone output, I don't think the headphone amp is dead. It seem more like the internal switching that connects the various sources to the headphone jack is not functioning. By the way, the audio I hear is not the source material, but what sounds like digital noise floor, and some very slights clicks as I adjust the output encoder knob.
P
|
Yes - thats what I meant more or less
The "internal switching" and amplifying etc. is all made *somewhere*.
If this process is done in xMon (as a part of the headphone circuit) then you could do a xMon replacement test.
If all this is done in the D-Dommand itself, you would have to borrow a D-Command ... or take your xMon to a friend who's running a D-Command and check it out there.
__________________
Cheers, STeff
---------------------------------------
MacPro5,1 ; 6-Core Intel Xeon 3,46 GHz, 32 Gig Ram, NVIDIA Quadro K5000 with 3 displays connected OSX10.15.7 Pro Tools|HDX Ultimate 2023.6 HD I/O&192Digital&96&96i I/Os D-Command ES 4xUnitor8 & 2xAMT8
|