View Single Post
  #1  
Old 09-11-2019, 12:29 PM
secutanudu secutanudu is offline
Member
 
Join Date: Nov 2002
Location: Albany, NY
Posts: 245
Default Low Latency Monitoring question

Hello,


Since I have issues with clicks/pops at low buffer sizes, I typically use higher buffer rates along with low-latency monitoring when tracking.



The problem comes when tracking vocals. I rely on plugins for reverb, and singers typically want to hear reverb on their voice during tracking. So when I have low-latency monitoring enabled, they obviously don't hear any plugins that are present on the vocal track.



What I have been doing is turning OFF low-latency monitoring. I mute the vocal track that they are recording onto and the vocalist hears the direct signal of the mic.


I then create a separate track with the same input as the vocal track and enable Input Monitoring. I put a reverb plugin on it, and set the mix to 100%. This works, because the latency is a non-issue when applied to JUST the reverb.



So the singer is hearing his direct signal as primary, and a reverb from pro-tools.


Is there a better way to do this without having to mute the singer's tracks? Then I have to unmute them for playback.


I feel like there's got to be a better way to achieve this....and I hope I am explaining clearly.



Thanks!
__________________
  • Pro Tools 2018
  • Windows 10 | Intel 6-Core i7 5930k | 16 GB DDR4 RAM
  • Lynx Aurora 16-TB Thunderbolt A/D Converter
  • Preamps: Focusrite ISA428 MK2 | Midas XL48 | PreSonus MP20
  • System Drive: Internal SATA Crucial 256GB SSD
  • Recording Drive: Internal SATA Crucial 2TB SSD
  • PreSonus CentralStation Plus Monitor Controller
  • Kemper PowerHead Profiling Guitar Amp
  • M-Audio BX8 Studio Monitor
Reply With Quote