Re: MTRX connection issue
If DADman says Locked and it shows connected from the Device Monitor list, it is connected. Have you read the user manual?
http://resources.avid.com/SupportFil...on_Guide_B.pdf
Red triangles means nothing is connected to that input. Green circle means you have a valid and sample rate locked signal.
Digilink is the right name for Pro Tools,. Every input/output is named for the connection type. You can configure naming of the ports from the Conf section.
Hardware I/O in Pro Tools shows up as the emulation type as setup in the Conf section of DADman (both ports are setup to MTRX 32x32 for me in Pri/Pri mode)
What Pro Tools version are you on?
Did you setup a Mon yet (read the manual if you haven't)?
Really isn't difficult as long as your remember this is Digital Audio Denmark hardware./software and not Avid/Digidesign.
__________________
Pro Tools Ult 2024.3, HDX 2, MTRX/SPQ, RME BBF Pro + MADIface Pro • S1 x 2, Fire HD10 + Max11, Dock, iPad Air5 • Mac Mini 14,12, 12 core, macOS 13.6.5 • RAM 32GB, SSD 4TB, GPU 19 core • QNAP TVS-872XT 148TB TB3
|