Re: Behringer BCF2000
Hi Skiflash.
First of all ,thank you for answer.
I have an Edirol PCR 80 and I succeed making to work automation plagins in protools M-P.
It is a little trick :
First please go to digidesign.com and donlowd Legacy MIDI Controllers PT7 directory.
I think is a rar fille. In it you'l find a .dll named cs 10 dll. Copy this dll in directory from Program files - common filles-digidesign-controllers.
After that you must asign some control change in yours fader in your bfc 2000.
Heare I send you a list of this control changes :
Global channel 16
Faders C1-9 = cc's 64-71 (track volume controls)
Buttons C32-39 = cc's 0-7, (mute or whatever buttons)
Button C40 = cc 8, (mode switch)
Button C27 = cc 19 (rewind)
Button C28 = cc 21 (stop)
Button C29 = cc 23 (record)
Button C30 = cc 22 (play)
Button C31 = cc 20 (fast forward)
Knobs B10,11,12 = cc's 72,73,74 (sends 3,4,5)
Knobs B14,15,16 = cc's 75,76,77 (sends 1,2, pan)
Pitch bend A22 = cc 9 (shift)
Mod wheel A32 = cc 14 (option)
Knob B13 = cc 15 (control)
Knob B14 = cc 15 (command)
Joystick B18 = cc 29 (right)
Joystick B19 = cc 28 (left)
Joystick B20 = cc 26 (up)
Joystick B21 = cc 27 (down)
You must asign to one fader control change number 27 (IT IS verry important!!!)
after that you mast asign the folorwing control change to yiour fader:
cc 72,cc73,cc74,cc75,cc76,cc77.each other them on the other fader.
First you have to move the fader wich have on it 27 CC.
Afther that, when you will move any of the two faders 72 or 77 you will see that you will succeed what you want to make it.
Enjoy and good luck.
Catalin
|