[Oady]

Hello All!

This is a new installation, no previous Eucontrol software/firmware installed. I installed Eucontrol 3.6.0, and updated the firmware to 1.5.4 on the Artist Mix controller. There seems to be a communication issue, as the OLEDs display what appears to be an empty "knob position box".

On the Workstations tab in the "My Workstations" column my computer does show up, but in the attached column there is an "X", not a check as described in the User guide.

I have also made sure that Eucon is enabled in Pro Tools System>Peripherals>Ethernet

In the "Assignments" tab, all 8 channels are "auto assigned", but I cannot lock either the entire surface or transport, as the boxes will not activate.

The controller is plugged directly into the ethernet port on my computer, no switch/router.

I have uninstalled the Eucontrol software and reinstalled it, and no change in the symptoms. I have tried three different patch cords, a full cross over cable Pins 1,2 and 3,6 as well as pins 4,5 and 7,8. A partial crossover cable (10-100bT) only pins 1,2 and 3,6, as well as a standard 568B patch cable, just in case the ethernet card happened to be auto sensing. No change in the symptoms with the crossover cable. The standard 5658B cable did not work.

Being the fact that this controller is used, I did a self test and it appears to pass with flying colors. I have also checked the network settings on the controller and DHCP is enabled.

I am using Pro Tools 10.0.0, with an Mbox Pro interface. Included below is the Sandra report in case any of that information is needed.

Any help would be greatly appreciated!
Thanks in advance for your time.

Oady

Sandra Report 21 MAY 17

SiSoftware Sandra

ID
Host Name : CS250-PC
Workgroup : WORKGROUP

Computer
Model : Sweetwater Sound CS250
Serial Number : 025013*******
Chassis : Desktop
Mainboard : Intel DH67GD
Serial Number : BTGD13******
BIOS : Intel BLH6710H.86A.0146.2011.1227.1631 12/27/2011
Total Memory : 16GB DIMM DDR3

Processors
Processor : Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz (4C 3.09GHz, 3.1GHz IMC, 4x 256kB L2, 6MB L3)
Socket/Slot : FC LGA1155

Chipset
Memory Controller : Intel Core (Sandy Bridge) DRAM Controller 100MHz, 2x 8GB DIMM DDR3 1.33GHz 128-bit, Integrated Graphics

Memory Module(s)
Memory Module : Patriot Memory PSD34G133381 4GB DIMM DDR3 PC3-10700U DDR3-1334 (9-9-9-25 4-34-10-5)
Memory Module : Patriot Memory PSD34G133381 4GB DIMM DDR3 PC3-10700U DDR3-1334 (9-9-9-25 4-34-10-5)
Memory Module : Patriot Memory PSD34G133381 4GB DIMM DDR3 PC3-10700U DDR3-1334 (9-9-9-25 4-34-10-5)
Memory Module : Patriot Memory PSD34G133381 4GB DIMM DDR3 PC3-10700U DDR3-1334 (9-9-9-25 4-34-10-5)

Video System
Monitor/Panel : LG E2360
(1920x1080, 23.1")
Video Adapter : Intel(R) HD Graphics Family (6CU 30SP SM4.1 850MHz/1.1GHz, 80kB L2, 64MB DDR3 1.33GHz 128-bit, Integrated Graphics)

Graphics Processor
Compute Shader Processor : Intel(R) HD Graphics Family (30SP 6C 850MHz/1.1GHz, 80kB L2, 64MB DDR3 1.33GHz 128-bit, Integrated Graphics)

Storage Devices
Seagate ST31000524AS (1TB, SATA600, 7200rpm) : 932GB (D:)
Seagate ST500DM002-1BD142 (500.1GB, SATA600, 3.5", 7200rpm, 16MB Cache) : 466GB (C:)
Cruzer (15.5GB, USB2/NVMe) : 14GB (E:)
Seagate ST3000DM001-1ER166 (3TB, USB3/SATA300/600, 3.5", 7200rpm) : 3TB (F:) (G:)

Logical Storage Devices
Audio (D:) : 932GB (NTFS, 4kB) @ Seagate ST31000524AS (1TB, SATA600, 7200rpm)
System Reserved : 100MB (NTFS, 4kB) @ Seagate ST500DM002-1BD142 (500.1GB, SATA600, 3.5", 7200rpm, 16MB Cache)
Glide (E:) : 14GB (FAT32, 16kB) @ Cruzer (15.5GB, USB2/NVMe)
Sys Backup (F:) : 491GB (NTFS, 4kB) @ Seagate ST3000DM001-1ER166 (3TB, USB3/SATA300/600, 3.5", 7200rpm)
Nat Inst (G:) : 488GB (NTFS, 4kB) @ Seagate ST3000DM001-1ER166 (3TB, USB3/SATA300/600, 3.5", 7200rpm)
Hard Disk (C:) : 445GB (NTFS, 4kB) @ Seagate ST500DM002-1BD142 (500.1GB, SATA600, 3.5", 7200rpm, 16MB Cache)

Peripherals
LPC Hub Controller 1 : Intel H67 LPC Controller
Audio Device : Intel Cougar Point High Definition Audio Controller
Audio Codec : Realtek Semi High Definition Audio
Disk Controller : Intel Cougar Point 6 port SATA AHCI Controller
USB Controller 1 : Intel Cougar Point USB Enhanced Host Controller #2
USB Controller 2 : Intel Cougar Point USB Enhanced Host Controller #1
USB Controller 3 : Intel Renesas Electronics USB 3.0 Host Controller
FireWire/1394 Controller 1 : Intel VT6315 Series Firewire Controller
SMBus/i2c Controller 1 : SMBus Dev Drv 1

Printers and Faxes
Printer : Microsoft XPS Document Writer (600x600, Colour)
Fax : Microsoft Shared Fax Driver (200x200)

Network Services
Network Adapter : Intel(R) 82579V Gigabit Network Connection (Ethernet, 100Mbps)
Wireless Adapter : NETGEAR WNA3100 N300 Wireless USB Adapter (802.11n (HT), AES-CCMP, 137Mbps)

Operating System
Windows System : Microsoft Windows 7 Personal 6.01.7601 (Service Pack 1)
Platform Compliance : x64

Performance Enhancing Tips
Warning 2513 : TPM not detected. Some security features are unavailable.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.