View Single Post
Old 02-12-2019, 12:21 PM
HiLoc HiLoc is offline
Join Date: Jan 2009
Location: Genval, Belgium
Posts: 92
Default Re: move HD3 with HDX and 192 with HD IO

Originally Posted by albee1952 View Post
For troubleshooting, I would simplify a bit. Disconnect the 192 so only the HD IO is connected. You say the outputs are working? Open the IO setup>Input tab. Delete all the input paths. Then create 8 mono inputs and "connect" by the grid matrix to the 8 analog inputs and test just those inputs. If they work, then shut it all down and connect the 192(which can connect to the HD IO expansion port, or directly to the other port of the HDX card) and add only the 8 analog inputs(same as above on the HD IO). Remember to connect the Loop Sync BNC cables.
I'll try to morrow

[FONT="Comic Sans MS"][B][COLOR="SlateGray"]Mac Pro Dual 6 Core Intel Xeon @ 3.46 GHz, 48Go RAM, OS 10.8.5, HDX Protools HD 10.3.10
1 x HD I/O + 1 x 192
Reply With Quote