With MTRX or any other PRE-compatible remote mic preamps, add microphone
Gain control to the Process Module encoder by holding down the
Back (arrow) button at the bottom of the Process Module while pressing the
Input switch. The encoder should turn Red. Bank using the adjacent
Arrow switches to get to the
Gain parameter. As a shortcut, engage the
ALL switch from the Master Module before performing this sequence to change the process module encoders on all channels. For higher resolution control of the preamp
Gain, press
Flip till the Process Module encoders glow bright white. Use
Shift +
Flip to exit back to the standard view.
Experiment by bringing other parameters to the process module encoder such as Threshold on DYN, Sends or HPF frequency for EQ.
https://www.dropbox.com/s/zwssf0s4hd...61118.MOV?dl=0