Re: Eleven Rack Re-amp using interface without S/PDIF
Since you are using the UR44 as your interface, all your routing in the DAW will be to/from the UR.
From what you have explained, connect outputs 5/6 from the UR to the 11R line inputs. You will have to go into the 11R input settings and select the Line Inputs as your input source.
Now run the main outs of the 11R to inputs 5/6 of the UR.
On the track with the dry signal, the output should be set to UR - output 5.
Now on the track you are recording the processed guitar signal, you will set the input to UR - input 5.
This should play the dry track through output 5 into the 11R, where it will be processed, then out the 11R back into the UR for recording.
|