Quote:
Originally Posted by meshzu
Hello, Has anyone know if its OK to run Dante Virual Sound Card as the same time as HDX system.
We have a Focusrite RED 4 pre and currently running with HDX, but I wanted to route the Mac system outputs via Dante Virtual Sound Card to the RED 4 outputs 7/8.
We had a few odd errors yesterday and wondering it was related to this.
|
Sorry, donīt understand your issue here, if you have the gear, why donīt you try it?
OK, having said that, donīt take it wrong, we have a RED4 connected to a iMAC through thunderbolt, but the HDX card is connected to a MTRX. We use it as an AD/DA via Dante to the MTRX. So the RED4 is in thunderbolt host mode and not Protools host mode.
Anyway, even in Protools host mode with an HDX card connected, we did a test and found that the Thunderbolt connection works in paralell, even if you set it to PT host. So, if you connect via thunderbolt, you actually donīt need the DVS at all. On Output routing tab, just set your analogue outs to be sourced from Playback 1 and 2 (MAC Core audio) and thatīs it.
If you want to route it via Dante, just set your Dante outs from the DVS as your analogue outs source, although I did never tried it, always used thunderbolt.