Re: Monitor Profile intermittent on S6
i have had this same issue on virtually every version of S6 and DADman. sometimes the DADman monitor profile fully loads, sometimes it only partially loads, like the lower part of the MTM screen populates, but the row of monitor sources at the top does not. sometimes all of the monitor sources populate but i cannot tap/select certain ones. sometimes the MTM fully populates but the cut/dim switches do not work.
the troubleshooting steps are typically these:
1. restart DADman
2. restart WSControl
3. restart MTM
4. on the MTM /Settings/Workstations/ disconnect then reconnect the workstation
sometimes an entire S6/Mac restart is the best option (including the S6 ethernet switch).
i am running the current versions of everything:
S6 19.9.1
DADman 5.3.4 build 3
DAD AX32 with current firmware 2.3.0.1
Pro Tool Ultimate 2019.6
__________________
Devin Emke
Audio Post Production
Saturday Night Live, NBC
Last edited by devinemke; 10-18-2019 at 01:59 PM.
|