Re: Fanless PSU MC Pro
It is super sensitive to grounding and voltages.
the 12v should be 12.6 V
The 5v should be 5.4 V.
Start there and go up in VERY small increments to a max of 5.8
My suggestion is to call Digital Audio Service in germany and order a new and very well built PSU
In calibrating the voltage, what I found was this:
At the lowest voltage, I only got a boot screen.
As I increased the voltage I got further into the boot.
At some point I far into the boot, but it froze with stripes across the screen
finally it would get to a full boot of xp, but more voltage was still needed to launch MC software.
|