Re: No signal to "Alt-Output" on XMON
As I am sure you realize by now, the MAIN and ALT outputs are wired for surround sound. So if you are using a normal AVID DB25 to DB25 cable, you would use channels 1 and 5 in to get the sound from XMON and controlled by D-Control.
Also ensure that, if you have the Surround Panning module that, you have the (green) L & R buttons pushed under the two small (centered) LED displays and that its set to Solo and not Mute.
Lastly, make sure you have the Sum button (Monitoring section - top left between two sets of rotary dials) pushed and activate the MAIN button below (MAIN also controls ALT)
I hope this helps. Feel free to PM me if you need any additional help.
__________________
Mac 8 Core 6,1 - OSX 10.13.6 - 32GB RAM - Pro Tools 2018.10 - 8x8x8+8 ch DA Card (x2) - HD OMNI - ICON D-Control 32 - Sync I/O - Sonnet xMac Pro Server w/HDX x 2, Blackmagic Intensity Pro 4K
Protools 2018.10 HD Native in 1 project suite
Eristopher Music
|