Re: S5 Joystick module calibration
To enter Test Mode press the 4 large switches simultaneously.
Pan L/R
Srnd F/B
Link
Solo
In Test Mode;
Channel Select switch exits any test.
Active sw. will enter LED tests
Motor sw. will enter switch tests.
Sel sw (third small switch down) followed by the Active sw. will re-calibrate to joystick.
Wave sw (fourth small switch) enters the joystick movement test.
Once here the Div and > switches will motor the j/s all left and all right.
The Foc and down arrow will step the motor left/right.
The other 4 small switches on the side do the same, but up/down instead of left/right.
|