Re: Monitor Page in PT | Control
You need to be on PT 18.7 or later.
Pro Tools lets you designate a Master Fader to act as a Monitor Path that can be controlled from EUCON control surfaces. Designation of a Master Fader as a EUCON Monitor path is stored in the Pro Tools session, letting it persist when a session is moved from a system with an S6 to one with a Dock, or similar.
To enable a Master Fader for EUCON Monitoring:
1 Ensure that Enable EUCON is selected in Setup > Peripherals > Ethernet Controllers.
2 Create a Master Fader track and assign it to any path being used for monitoring (this can be your main Monitor Path, or other).
3 Right-click the name of the Master Fader and select EUCON Monitor.
The Control Room/Monitor knob on your EUCON control surface controls that Master Fader track for monitoring.
For example, on the Dock with a Master Fader assigned to EUCON Monitor:
• Rotating the Monitor/Control Room knob raises and lowers the Master Fader level.
• Pressing the knob sets Master Fader level to –INF (effectively Muting or “cutting” the monitor level). Press again to return to the previous level.
|