Re: How do I connect external effects to a Digi-002R via S/PDIF?
Each single Spidf RCA jack is actually 2 channels over 1 cable.
So if you have the cables going out of your 002 into the effects unit, and another going from the effects unit to the 002, you've got 2 channels both ways.
One thing to verify, in the Hardware setup menu, make sure Spidf is NOT selected as Optical.
Then, go into your I/O setup, and in each tab (input, output, inserts, busses), click "default". That should reset things in case they got messed up.
If you're trying to set it up as a send/return, do this:
Create a stereo Aux track. On the input of that track, select a pair of busses, such as buss 3-4, or 5-6, etc.
On that aux track, in the insert section, instead of selecting a plugin, you select I/O, and then select Spidf. This will now route signals to your effects unit and back again, just like it was a plugin.
And then, create sends on whatever tracks you want to send to that, routing the sends to whatever buss you chose (3-4, 5-6, etc.).
|