View Single Post
  #3  
Old 06-21-2017, 01:23 PM
TrentWilliams TrentWilliams is offline
Member
 
Join Date: Aug 2012
Location: Wellington, New Zealand
Posts: 985
Default Re: Focusrite Clarett 8PreX Pad

Quote:
Originally Posted by junkgear View Post
What troubleshooting have you done?

Assuming everything is connected properly and phantom power engaged, do you get decent input level readings on the input meters?

Have you tried the mic in other inputs to make sure one of your preamps isn't bad?

Does the mic work with other preamps, like your 003?

Have you tried other input sources and do they have sufficient level?

Can you play audio through the unit and is the output level normal?
Hey thanks for your reply

Yip, connected and phantom engaged.

I'm getting around -24db with gain set to around 5:00.

I've tried the mic on channels 1 thru 8, all the same.

The U87 works fine when I plug it into my SQN4s Series IV field mixer.

I've also tried it with an MKH816T, which I am getting more level out of, but still not what I would call great.

I can play audio out of the 8PreX no problem, it's calibration is out by around 0.1db between Pro Tools metering and Focusrite metering.

When I play audio from iTunes through the 8PreX (iTunes cranked up to full, which should be 0db), all of the clip light indicators turn red on the 8PreX and Focusrite Control.
__________________
Pro Tools 2024.3.0|Perpetual • MTRX Studio • HDX1 • Sync-X • S3 • DockMac Mini 2018 - 3.2GHz i7 6-core macOS 13.6 • RAM 64GB DDR4 GPU AMD 6900XT 16GB • Monitor LG 32UL950-W
Reply With Quote