[777N]

Hi guys,

I am experiencing some problems using this two interfaces (003 Rack and 828 mk II) via ADAT.
I've had experience on syncing various systems, but this set up seems very weird.

So, my 003 is plugged via firewire on my PC and I can get signals. The 828 is plugged correctly via ADAT (I've tried with one and both cables). On "Hardware" I can select "Internal" or "ADAT", respectively if I want the 003 master or slave. With my 828 I selected "ADAT" on "Optical In/Out" (from the LCD menu) and then on "Clock Source" I can select "Adat Opt 44/48" or "Int 44.1". (I work with 44.1kHz)

With Master/Slave correctly set up the interfaces seems working (no blinking, no clip).
On I/O settings PT 8 LE can see the extra 8 channels, so I've created some new paths.
I've tryed every combination but I get NO sound at all from the 828 (the meters on the interface work fine).

Thanks for any help