Re: Insert Brain Fade
It depends what your I/O count, on your sound card is.
If it's just stereo in / stereo out, you're in trouble.
If you have at least 4 inputs, and 4 outputs, you're in business.
To use hardware inserts, they have to be connected on matched pairs of I/O.
Your main outputs are going to be connected to your speakers, so you would need to connect outputs 3/4 (for example) to your external EQ inputs - then connect the outputs of said unit, to inputs 3/4 of your sound card.
Go to the "set up" I/O menu, and click on the inserts tab, then configure I/O 3&4 as a hardware insert.
Once that is done, just go to the usual track insert slot, and select the hardware insert, instead of a plug-in.
Note that you aren't recording through any inserts - so they need to be printed to another track / committed in realtime.
Sent from my iPhone using Tapatalk
|