Thread: 9173error
View Single Post
  #17  
Old 07-07-2019, 03:12 PM
yorgo yorgo is offline
Member
 
Join Date: Feb 2014
Location: Brampton
Posts: 101
Default Re: 9173error

So I ran LatencyMon while playing back a song in studio one...it seems less of a pain than pro tools but still bad....Can anyone see what could be the problem?

__________________________________________________ __________________________________________________ _____
CONCLUSION
__________________________________________________ __________________________________________________ _____
Your system appears to be having trouble handling real-time audio and other tasks. You are likely to experience buffer underruns appearing as drop outs, clicks or pops. One problem may be related to power management, disable CPU throttling settings in Control Panel and BIOS setup. Check for BIOS updates.
LatencyMon has been analyzing your system for 0:05:57 (h:mm:ss) on all processors.


__________________________________________________ __________________________________________________ _____
SYSTEM INFORMATION
__________________________________________________ __________________________________________________ _____
Computer name: TAVARES-PC
OS version: Windows 7 Service Pack 1, 6.1, build: 7601 (x64)
Hardware: All Series, ASUS, ASUSTeK COMPUTER INC., Z87-A
CPU: GenuineIntel Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz
Logical processors: 4
Processor groups: 1
RAM: 16255 MB total


__________________________________________________ __________________________________________________ _____
CPU SPEED
__________________________________________________ __________________________________________________ _____
Reported CPU speed: 3405 MHz

Note: reported execution times may be calculated based on a fixed reported CPU speed. Disable variable speed settings like Intel Speed Step and AMD Cool N Quiet in the BIOS setup for more accurate results.

WARNING: the CPU speed that was measured is only a fraction of the CPU speed reported. Your CPUs may be throttled back due to variable speed settings and thermal issues. It is suggested that you run a utility which reports your actual CPU frequency and temperature.



__________________________________________________ __________________________________________________ _____
MEASURED INTERRUPT TO USER PROCESS LATENCIES
__________________________________________________ __________________________________________________ _____
The interrupt to process latency reflects the measured interval that a usermode process needed to respond to a hardware request from the moment the interrupt service routine started execution. This includes the scheduling and execution of a DPC routine, the signaling of an event and the waking up of a usermode thread from an idle wait state in response to that event.

Highest measured interrupt to process latency (Ás): 8754.312817
Average measured interrupt to process latency (Ás): 2.700545

Highest measured interrupt to DPC latency (Ás): 573.939940
Average measured interrupt to DPC latency (Ás): 1.106895


__________________________________________________ __________________________________________________ _____
REPORTED ISRs
__________________________________________________ __________________________________________________ _____
Interrupt service routines are routines installed by the OS and device drivers that execute in response to a hardware interrupt signal.

Highest ISR routine execution time (Ás): 33.535683
Driver with highest ISR routine execution time: HDAudBus.sys - High Definition Audio Bus Driver, Microsoft Corporation

Highest reported total ISR routine time (%): 0.00640
Driver with highest ISR total time: hal.dll - Hardware Abstraction Layer DLL, Microsoft Corporation

Total time spent in ISRs (%) 0.008080

ISR count (execution time <250 Ás): 344904
ISR count (execution time 250-500 Ás): 0
ISR count (execution time 500-999 Ás): 0
ISR count (execution time 1000-1999 Ás): 0
ISR count (execution time 2000-3999 Ás): 0
ISR count (execution time >=4000 Ás): 0


__________________________________________________ __________________________________________________ _____
REPORTED DPCs
__________________________________________________ __________________________________________________ _____
DPC routines are part of the interrupt servicing dispatch mechanism and disable the possibility for a process to utilize the CPU while it is interrupted until the DPC has finished execution.

Highest DPC routine execution time (Ás): 630.877239
Driver with highest DPC routine execution time: iusb3xhc.sys - Intel(R) USB 3.0 eXtensible Host Controller Driver, Intel Corporation

Highest reported total DPC routine time (%): 0.283586
Driver with highest DPC total execution time: iusb3xhc.sys - Intel(R) USB 3.0 eXtensible Host Controller Driver, Intel Corporation

Total time spent in DPCs (%) 0.625757

DPC count (execution time <250 Ás): 2038096
DPC count (execution time 250-500 Ás): 0
DPC count (execution time 500-999 Ás): 34
DPC count (execution time 1000-1999 Ás): 0
DPC count (execution time 2000-3999 Ás): 0
DPC count (execution time >=4000 Ás): 0


__________________________________________________ __________________________________________________ _____
REPORTED HARD PAGEFAULTS
__________________________________________________ __________________________________________________ _____
Hard pagefaults are events that get triggered by making use of virtual memory that is not resident in RAM but backed by a memory mapped file on disk. The process of resolving the hard pagefault requires reading in the memory from disk while the process is interrupted and blocked from execution.

NOTE: some processes were hit by hard pagefaults. If these were programs producing audio, they are likely to interrupt the audio stream resulting in dropouts, clicks and pops. Check the Processes tab to see which programs were hit.

Process with highest pagefault count: studio one.exe

Total number of hard pagefaults 6
Hard pagefault count of hardest hit process: 2
Number of processes hit: 2


__________________________________________________ __________________________________________________ _____
PER CPU DATA
__________________________________________________ __________________________________________________ _____
CPU 0 Interrupt cycle time (s): 12.304178
CPU 0 ISR highest execution time (Ás): 33.535683
CPU 0 ISR total execution time (s): 0.115391
CPU 0 ISR count: 344904
CPU 0 DPC highest execution time (Ás): 630.877239
CPU 0 DPC total execution time (s): 8.916926
CPU 0 DPC count: 2028369
__________________________________________________ __________________________________________________ _____
CPU 1 Interrupt cycle time (s): 1.291883
CPU 1 ISR highest execution time (Ás): 0.0
CPU 1 ISR total execution time (s): 0.0
CPU 1 ISR count: 0
CPU 1 DPC highest execution time (Ás): 157.433186
CPU 1 DPC total execution time (s): 0.006083
CPU 1 DPC count: 2551
__________________________________________________ __________________________________________________ _____
CPU 2 Interrupt cycle time (s): 1.020133
CPU 2 ISR highest execution time (Ás): 0.0
CPU 2 ISR total execution time (s): 0.0
CPU 2 ISR count: 0
CPU 2 DPC highest execution time (Ás): 116.914244
CPU 2 DPC total execution time (s): 0.004132
CPU 2 DPC count: 1989
__________________________________________________ __________________________________________________ _____
CPU 3 Interrupt cycle time (s): 1.508878
CPU 3 ISR highest execution time (Ás): 0.0
CPU 3 ISR total execution time (s): 0.0
CPU 3 ISR count: 0
CPU 3 DPC highest execution time (Ás): 291.698972
CPU 3 DPC total execution time (s): 0.009652
CPU 3 DPC count: 5221
__________________________________________________ __________________________________________________ _____
__________________
Pro tools 11.3, Windows 7 Premium,
Desktop i5 4670 3.4ghz 16G ram quad core
Reply With Quote