It's come to my attention for quite a while now that I'm not to good at gain staging
I've put this in the getting started section coz all the posts might help others as well as me
When I track I have the metering set to pre fader. I always try my hardest to have the level just touching the yellow on the loudest parts (-6) and have the input monitoring selected (as I'm on HD) so I can monitor the signal coming in. When I add a plugin say for example waves CLA 2A the input level increases on the fader meter. I then check the input on the plugin is just hitting -6 which is the same as the signal coming in when the plug is inactive. If this is correct and the fader meter shows an increase in signal I turn down the output on the CLA 2A making the fader level meter the same for both when the plugin is active and inactive.
Now if I add another plugin I want the input to be -6 on the plugin meter and weather the plugin is active or inactive the fader meter should still be hitting -6 as well, have I got this right???
Hope I've made sense and I'm doing things right if not please advise and shed some light on what I can do to improve this