Quote:
Originally Posted by gvees
I have a triple channel OCZ 3x2 (6Gb) kit which should be 1600, so I adjusted it to match that... :) (in slot 1,2 and 4) This OCZ kit is 'especially for i7' optimized for X58 chipsets.
One other thing about my hd's.. I now have the barracuda 1tb and I have my os and pt installed on it, which isn't the right thing, but I don't have another (fast) hd.. I only have another (older) Maxtor 160gb drive, also Sata but only 1,5Gb/s instead of 3 gb/s for the barracuda...
Do you think it would be better for the performance to install xp on the maxtor drive and have pro tools run from the barracuda?
(So I would also install PT to that drive and not on the Maxtor...)
|
i dont remember right off if you had the intel or gigabyte board. on the gigabyte you skip the second ram dimm, and use 1-3-4.
i would just leave the os drive. a sata 1 drive for most purposes will be fine. your 160 maxtor will be fine till you can upgrade.
__________________
pro-tools-pc.com
TRASHER Pro Tools Utility(updated 4-11-2024)
HD Native, Avid 16x16, Eleven Rack, Focusrite Clarett 8preX, UA Quad Apollo TB.
Intel I7 9900k
Win 10