Re: Motu 8pre to 002 via ADAT?? Help!
To use the ADAT optical inputs you will do this:
Go to the setup menu and select hardware. Select ADAT. Make sure the sample rate on the MOTU matches the session sample rate.
Then go back to setup and select I/O. Select the inputs tab. You'll see analog 1-8, optical 9-16 and S/PDIF 17-18. Creat 8 new paths and match the path with the inputs. ie path 1 to input 9, path 2 to input 10 etc.....
Once this is routed you then go to the inputs on your track and select interface and you'll see the paths 1 through 8. Apply them to whichever track you wish to record from this source.
Hope that helps!
__________________
Pro Tools 2019.6
iMac (Retina 5K, 27-inch, Late 2015) OS 10.14.6
4 GHz Intel Core i7
32 GB 1867 MHz DDR3
Apogee Symphony MKII Thunderbolt 2X6
|