[albee1952]

Could be a grounding issue so maybe test all the outlets on the strip with a circuit tester(Home Depot for about $10). Also, since it is the 002, it might be worth reseating the power harness connection(several times) that feeds the fader circuit board. Another way to test for grounding would be to ground yourself(grab the rack rails or something that is a certain ground) with one hand while you try to move a fader with the other hand. Also, go into preferences and make sure that the "silent" mode isn't enabled(can't remember what it was called for sure, but there used to be a mode that would disable the faders to keep noise down(fader moves in automation still played out and faders on the screen would move).