Quote:
Originally Posted by electricfiddle
That's what I wanted to do from the beginning... But the question on Impedance arose since the 11r's "output to amp" was not the right impedance for pedals or running to the qsc or radial. The question I have is would running the XLR out to 1/4" in on the pedal work? I would need a XLR to 1/4" cable... Would that then be the correct impedance? Thanks
|
The output to amp jack provides a proper level and impedance for driving a guitar amp. Therefore it is also suited to driving a pedal.
You'll still need the direct box to drive a board from the output of the Boomerang. If you intend to drive the QSC directly from the Boomerang's output, that'll work just fine. Use an ordinary instrument cable. The QSC has combo jacks that'll accept either 1/4" or XLR plugs.