"The M Box 2 allows you to record analogue and digital inputs at the same time." Taken from this article;
http://www.soundonsound.com/sos/nov0...cles/mbox2.htm
I would suggest connecting the Triton to the Mbox using S/PDIF connections. You'll need two s/dif cables;
Triton s/dif in>Mbox s/pdif out
Mbox s/pdif in > Triton s/pdif out
In Pro Tools go to setup>Hardware>Clock Source...with Mbox selected in window choose 'Internal' and with Triton selected in window choose 'External'. (If the Triton is not showing up you may have to refer to Triton manual to set it's clock source to external).
Note: One interface must be chosen as the MASTER (which is what you are doing by choosing 'Internal' as clock source and the other as SLAVE..doing so by choosing 'external clock source). If you have two Masters or two slaves this setup will not function correctly.
Doing it this way leaves your Mbox analogue I/O's free for other use such as vocals or guitar etc.
Triton Extreme S/PDIF outputs send a digital version of the same audio signal as the AUDIO OUTPUT (MAIN) L/MONO and R jacks, at sampling rates of
48 kHz. (information acquired from Triton Extreme user manual).
Note: So when creating a Pro Tools session use the 48k sample rate.
In Pro Tools go to setup>I/O>Input Tab. Look to see which channel s/pdif is on and double click to rename channel. Rename it Triton (or whatever else you want).
Do same on Output Tab>click OK.
Doing this will make it easier to select I/O options when creating new tracks.
If you want to use the Triton as a Midi Controller as well, connect;
Triton Midi out>Mbox Midi in
Mbox Midi out>Triton Midi in
You will need to set the Triton as a controller in Pro Tools Setup>peripherals>Midi Controllers
Doing this you will be able to use the Triton to control 'Virtual Instruments' that can be used as plugins on a channel.
Now that these connections have been made, you have two scenarios in which you can record.
1. Use the onboard Triton library of sounds
2. Use Pro Tools+ third party plugin virtual instruments (VI's)
In Mix view in Pro Tools;
In scenario 1. Create an
audio track and select channel input>interface to Triton (or whatever you named it in the I/O setup above) record enable and away you go!
In scenario 2. Create an
Instrument track, instantiate a VI plugin within 'Inserts' on channel strip and select channel input>interface to Triton (or whatever you named it in the I/O setup above) record enable and away you go!
Doing this will enable you to blend sounds together between Triton & VI's.
If you want to have Triton control sounds seperately, when selecting input/output on each channel, the option to select different midi channels is presented.
It would be a good idea to refer to both the Pro Tools user guide and the Triton Manual to familiarize yourself with how to use this setup correctly.
Good luck and I hope this is of some help.