I finally tried to have a crack at getting this running with an old blue X-Mon (our d-command died, and have been hoping to get this into action).
I followed the guide posted on the DUC here...
http://duc.avid.com/showthread.php?t=400839
No luck, so checked our old Xmon cable and noticed Pin 11, 12, 3 and 4 had no through continuity, which seemed at odds to this guide. I then found this post on Gearslutz....
https://www.gearslutz.com/board/high...rol-cable.html
This seems to confirm my thoughts, and I tried adjusting the Midi In and Out pins to 10 & 2, and 9 & 1. I then had MIDI information in and out of the X-Mon which I could see flashing when the iPad app was adjusting signals, BUT...
The X-Mon remained frozen on Mute, and could not unmute through any means (front button, the apple XMON app, or the iPad.)
I am a bit stuck about what to do here, so wanted to ensure that the Blue X-Mon is indeed supported, if there is any things to be aware of regarding pin layout discrepancy or other things to be aware of.
Thanks for your help! My Apogee Symphony just went down today as I was having a crack at this, so I am now without and volume control, so any advice would be amazing.
Best,
Matt