View Single Post
  #3  
Old 06-24-2010, 11:30 AM
Dorian Green Dorian Green is offline
Member
 
Join Date: Jul 2008
Location: France
Posts: 210
Default Re: Grid mode, shuffle mode, spot mode and slip mode.

Heya!

There is 2 Grid Mode :
Absolute :Each time you move a region its beginning will be set On the grid, depending the grid resolution you've chosen.
Relative: Each time you move a region in this mode, regardless of the exact beginning point of you region, it will be move 1 bar, 1/2 bar, 1/4 bar....i.e if you have an Attack which is just before, let's say 20ms before the Transient, if you move it 1 bar backward in Relative Grid Mode, the beginning of the region will be set 1 bar earlier minus 20 ms before the Absolute Grid.

Shuffle Mode: When you delete a region in between two contiguous, the third one will shift to the left and will stick to the end of the first one. Doing this on all the tracks at the same time will have the same effect as using the Cut Time Function.

Spot Mode: Each time you use the Smart tool in this mode, a dialog box will appear.
This mode is used when you need to move, trim a region very accurately by entering numeric datas.

Slip Mode: Pure Freedom!

Note you can associate two mode at the same time.It rare but you'll find some situations you'll need that.

Hope it helps.
__________________
Green Room Studios, France
Mac Book Pro i7 15"4 Mac OSX 10.6.6
PT 9.0.2
DIY Intel Core 2 Quad, P5B Premium,DDR2 6GB, Win 7 Ultimate.
PTLE 8.0.4
002R Unit and MBox Mini
SSL XLogic Alpha Channel.
SPL Goldmike valve Preamp.
DBX Analog Compressors, Gate and Eq.
Monster Cables
Home made & Neutrik Patchbay.
Brauner, Shure, Seinnheiser and T.Bone mikes.
Tannoy 8D Active monitors.
Reply With Quote