Thread: fighting faders
View Single Post
  #48  
Old 03-03-2016, 01:30 AM
StefB's Avatar
StefB StefB is offline
Member
 
Join Date: May 2000
Location: Cape Town South Africa
Posts: 448
Default Re: fighting faders

But it is not on ALPS's catalog anymore. Instead, there is the very close model number RSA0K11V901S, that Simon Li was speaking about just above me.

You can download the 3D modelization of this fader on ALPS website :

http://www.alps.com/prod/info/E/HTML...0K11V901S.html

It looks absolutely the same as the 900C model, but there is one difference : The connector for the data cable is not on the side of the fader, but on the bottom.
Despite this, it's the same connector. It's just the placement which has changed.

I'm wondering to buy one to make a test. But there is one more question I have to fix.
Is it a plastic or carbon model ?


IT IS "CP" - Conductive Plastic model
__________________
Mac 8 Core 6,1 -Os 10.12.6 - 64 gb Ram - Protools 12.8 HDX - 8x8x8+8 ch DA Card - DCommand ES24 - Sync HD - Video Satelite (Symphony 8.9.1 on 4 Core Mac Pro Dustbin with AJA Kona 3g) Soundminer 4.5 Pro
Protools 12.8.0 Vanilla in 2 x Edit suites one with S3 and one with Mackie Control.
Mediacomposer 8.9.1 on AJA Kona 3g x 3 suites
Reply With Quote