Re: Command8 faders
Quote:
Originally Posted by albee1952
Run the fader calibration routine? Google the web for a manual to explain how to do this. If you have automation that jumps up/down a lot, it could be normal mechanical noise  |
Ok, here's what fader test shows:
Lower position:
Fader 1: T=141; 0
Fader 2: T=144; 0
Fader 3: T=142; 0
Fader 4: T=141; 0
Fader 5: T=140; 0
Fader 6: T=142; 0
Fader 7: T=142; 0
Fader 8: T=142; 0
Middle position:
Fader 1: T=142; 509
Fader 2: T=144; 508/509
Fader 3: T=142; 509
Fader 4: T=142; 507/508
Fader 5: T=141; 510/511
Fader 6: T=143; 509/510
Fader 7: T=142; 509/510
Fader 8: T=142; 509/510
Upper position:
Fader 1: T=142; 1023
Fader 2: T=144; 1023
Fader 3: T=142; 1023
Fader 4: T=142; 1023
Fader 5: T=141; 1023
Fader 6: T=142; 1023
Fader 7: T=142; 1023
Fader 8: T=142; 1023
As I understand values 0-1023 represent fader's position but what is T parameter?
__________________
PT HD 2018.1, Mac Pro 2013, Digidesign Command 8, Focusrite Clarett 2Pre
|