Here's my previous post about this S3:
http://duc.avid.com/showthread.php?p...30#post2526630
The S3 was purchased brand new.
Faders 1-8 behave very strangely. I've seen them all move on their own (sporadically), but only during boot/firmware update (never during use with PT). I swapped out fader #10 and #1 to confirm that the faders aren't the problem.
I'm now leaning towards this being corrupted software in the device.
Since I received the S3, it almost always goes through some sort of update procedure after boot up. It takes 10-15 minutes each time. Clearly this is not normal behavior.
The device was sent to Avid with an RMA and it was returned in the same condition.
Thanks for any help you can provide!