Re: Digital Monitoring with 002: not possible???
Thanks, Rail. It works like a charm.
Just to summarize for others, to monitor digital and analog outputs simultaneously with the 002:
Assign all outputs destined for the main stereo pair to an AUX bus, not a Master Fader (like 15&16). Then, assign the AUX to two outputs, one of which is your main stereo pair (usually 1&2), the other the spdif outputs (usually 17&18). Do this by holding down the control key (MAC) while selecting the second destination from the output destination list.
Now, leave the Master at unity gain (at zero) and the AUX becomes your new master fader.
If you are monitoring all sessions digitally, as I am, you may want to set up a template so all sessions have the proper I/O and track/aux routing ready to go.
Thanks again Rail.
Opus
__________________
The church is near, but the way is icy. The tavern is far, but I will walk carefully.
|