Re: !!!HELP DIGIDESIGN, My new HD system does not find my 192 HELP!!!
On Pro Tools start up when it tells me I have no interface, there is a pop up box that says "Retry or Quit". When my 192 is on, if I hit retry I can hear it click, the lights go out for a millisec and then come back on, then it just give me another box telling me it can't find my interface "Retry or Quit" again.
Once again, if I try to start the 192 first, before the G4, it just hangs out in "sleep mode" or whatever until I hit start on the G4. At that time, once I push the G4 on button, the power light lights up for a second and then goes dark and my G4 WILL NOT START AGAIN, no matter if the 192 is on or not. At the same time I hit the power button, the 192 COMES out of sleep mode and starts initializing. Still my G4 will not start until I UNPLUG IT FROM THE WALL AND TURN OFF THE 192.
If I use my 32bit expansion bay, I am able to start the 192 first, correctly, i.e. have it initialize, ect. If the PT cards are in the expansion bay, my G4 will also start correctly after the 192 is on. BUT I STILL GET THE NO INTERFACE SCREEN WHEN I TRY TO START PT.
This is really aggrevating me. I have no idea what is wrong. I don't know if it's the cards, or the 192. My computer is fine, because JUST YESTERDAY I HAD A MIX+ SYSTEM RUNNING FINE.
The OS I'm running is 9.2.1. So, that should be good.
I need tech support and they are closed so I'm hoping for an administrator or anyone who's had similar problems. Once again, everything is hooked up correctly, the right cards in the right slots, ect.
Shane Olivo
Milwaukee, WI
(414)282-4322
|