View Single Post
  #7  
Old 12-13-2018, 01:10 PM
tom_lowe tom_lowe is offline
Member
 
Join Date: Sep 2006
Location: London, UK
Posts: 1,083
Default Re: HD Omni turning on but has no display

Quote:
Originally Posted by Shan View Post
A similar issue happened to my HD OMNI a few years back. You'll need to change the contrast of the display and then reset the unit. Turn the unit on then press SETUP, then rotate the PUSH CR/HP knob clockwise 14 indents, press the PUSH CR/HP knob and then rotate it until you can read the display again. Once you can read the display again, you can do the procedure to reset the unit: SETUP > rotate the PUSH CR/HP knob to RESET(13 indents) > press the PUSH CR/HP knob and select "SURE?". As a side note, you can shine a flashlight into the display to help read it when you change the contrast back. The contrast default is 20.

Keep me posted if this worked out for you.

Shane
Thanks so much! just randomly had the same thing happen!
Reply With Quote