View Single Post
  #3  
Old 02-28-2019, 03:30 AM
andrej770 andrej770 is offline
Member
 
Join Date: Dec 2000
Posts: 432
Default Re: Tracks not showing up in D control

If it says D-Control on the two channel it means the board is offline mode. First, you must have a main console section of the D-Control to use the D-Control control surface. The Fader units cannot be used alone even though they show up in Pro Tools. Secondly, it only shows D-Control on the fader and main units when you are NOT in an active session in Pro Tools because (of course) this is a control service only for Pro Tools even though you can use the monitoring section to hear any sounds input into the XMON.

I hope this helps. Feel free to PM me if you need any additional help.
__________________
Mac 8 Core 6,1 - OSX 10.13.6 - 32GB RAM - Pro Tools 2018.10 - 8x8x8+8 ch DA Card (x2) - HD OMNI - ICON D-Control 32 - Sync I/O - Sonnet xMac Pro Server w/HDX x 1, Blackmagic Intensity Pro 4K
Protools 2018.10 HD Native in 1 project suite
Eristopher Music
Reply With Quote